To manufacture inexpensive and disposable bio-electronic devices, a R2R printing method has been fully utilized as a large-scale advanced manufacturing platform (LAMP) to fabricate new bio-electronic circuits such as all printed neuromorphic controller and TFT-sensor array matrix through developing bio-electronic inks and optimizing cell printing.
학력
1989 BS (Chemistry), Natural Science College, Kyunghee University, Korea
1995 Ph.D (Chemistry), University of Oklahoma, USA
약력/경력
Professor of Biophysics, Institute of Quantum Biophysics, Sungkyukwan University, 2019. 09 – present
Visiting Scholar of EECS, University of California, Berkeley, 2013. 09- 08. 2016
Visiting Research Engineer of EECS, University of California, Berkeley, 2011.09 – 2013.08
Visiting Professor of Materials and Construction Lab, Tokyo Institute Technology, 2013, 06 - 2013, 08
Professor of Printed Electronics Engineering, World Class University (WCU) Program in Sunchon National University, 2008- 2019. 08
Professor of Chemical Engineering, Sunchon National University, 1996 – 2008
Visiting Research Scholar, Rice University, 2004, 12 – 2006, 03.
Chair of Regional Innovation Center: Specialized Printed Electronics in Sunchon National University, 2005, 03- 2019. 08
Chair of Research Consortium for Developing Roll to Roll Printed RFID Tags, 09/2007- 08/2012
학술지 논문
(2023)
Plasmonic materials and manufacturing methods for rapid and sustainable thermal cycler for PCR.
MATERIALS TODAY ADVANCES.
20,
1
(2023)
Control of the coffee ring effect during R2R gravure printing for minimizing threshold voltage variation in printed carbon nanotube-based thin film transistors.
MATERIALS TODAY ADVANCES.
18,
1
(2023)
Tuning the charge carrier polarity of roll-to-roll gravure printed carbon nanotube-based thin film transistors by an atomic layer deposited alumina nanolayer.
NANOSCALE ADVANCES.
5,
15
(2023)
Towards Digital Twin Implementation in Roll-To-Roll Gravure Printed Electronics: Overlay Printing Registration Error Prediction Based on Printing Process Parameters.
NANOMATERIALS.
13,
6
(2023)
Rapid Uniformity Analysis of Fully Printed SWCNT-Based Thin Film Transistor Arrays via Roll-to-Roll Gravure Process.
NANOMATERIALS.
13,
3
(2023)
Improving Stability of Roll-to-Roll (R2R) Gravure-Printed Carbon Nanotube-Based Thin Film Transistors via R2R Plasma-Enhanced Chemical Vapor-Deposited Silicon Nitride.
NANOMATERIALS.
13,
3
(2023)
Classification and redundancy quantitative evaluation algorithm for highly efficient fault diagnosis of rotary machines in roll-to-roll system.
MEASUREMENT.
206,
1
(2022)
Vancomycin-conjugated polydopamine-coated magnetic nanoparticles for molecular diagnostics of Gram-positive bacteria in whole blood.
JOURNAL OF NANOBIOTECHNOLOGY.
20,
1
(2022)
Control of the Drying Patterns for Complex Colloidal Solutions and Their Applications.
NANOMATERIALS.
12,
15
(2022)
Enhancing Mixing Performance in a Rotating Disk Mixing Chamber: A Quantitative Investigation of the Effect of Euler and Coriolis Forces.
MICROMACHINES.
13,
8
(2022)
Fully roll-to-roll gravure printed electronics: challenges and the way to integrating logic gates.
JAPANESE JOURNAL OF APPLIED PHYSICS.
61,
SE
(2022)
Strain Optimization of Tensioned Web through Computational Fluid Dynamics in the Roll-to-Roll Drying Process.
POLYMERS.
14,
12
(2022)
Effect of Radial Stress on the Nanoparticle-Based Electrolyte Layer in a Center-Wound Roll with Roll-to-Roll Systems.
NANOMATERIALS.
12,
6
(2022)
Achieving specified geometric quality in a fully printed flexible functional layer using process parameters in roll-to-roll printed electronics.
FLEXIBLE AND PRINTED ELECTRONICS.
7,
1
(2022)
Characterization of silver nanoparticle inks toward stable roll-to-roll gravure printing.
FLEXIBLE AND PRINTED ELECTRONICS.
7,
1
(2021)
Impact of Sensor Data Characterization with Directional Nature of Fault and Statistical Feature Combination for Defect Detection on Roll-to-Roll Printed Electronics.
SENSORS.
21,
24
(2021)
Fully roll-to-roll gravure printed 4-bit code generator based on p-type SWCNT thin-film transistors.
FLEXIBLE AND PRINTED ELECTRONICS.
6,
4
(2021)
Roll-to-Roll Gravure-Printed Carbon Nanotube-based Transistor Arrays for a Digital Column Chromatograph.
ADVANCED MATERIALS TECHNOLOGIES.
00,
00
(2021)
Printed Four Key-Device Units for Unified Platform of Wireless Anti-Counterfeiting Label to Bridge in Blockchain.
ADVANCED MATERIALS TECHNOLOGIES.
7,
5
(2021)
Wireless pH-logger label for intelligent food packaging.
FLEXIBLE AND PRINTED ELECTRONICS.
6,
4
특허/프로그램
전도성 고분자의 표면 플라즈모닉 현상을 이용한 광 PCR 시스템 및 이를 이용한 타겟 핵산의 실시간 검출.
10-2020-0109881.
20230125.
대한민국
R2R 공정을 이용한 오가노이드 실시간 모니터링 장치 제조.
10-2020-0108808.
20221202.
대한민국
위변조 방지를 위한 NFC QR 코드 라벨 및 NFC QR 코드 라벨의 제조 방법.
17/146471.
20221018.
미국
TiO2 나노구조 기반 핵산 검출장치 및 롤투롤 공정을 이용한 이의 제조방법.
10-2020-0109719.
20220926.
대한민국
플라즈모닉 우물 기반 핵산 검출장치 및 롤투롤 공정을 이용한 이의 제조방법.
10-2020-0108807.
20220718.
대한민국
R2R 랭뮤어-블로젯 공정을 이용한 핵산 검출장치 제조.
10-2020-0109679.
20220704.
대한민국
롤투롤 공정으로 제조된 그래핀 기반 표면 플라즈몬 공명 분자진단 장치및 이의 제조방법.
10-2020-0109700.
20220527.
대한민국
세포 또는 조직의 3차원 배양 및 모니터링용 센서 및 이의 롤투롤(R2R) 기반 제조 방법.
10-2020-0075062.
20220512.
대한민국
롤투롤 인쇄 기반 인쇄 렉테나 제조 방법 및 인쇄 렉테나와 이를 이용한 전자 장치.
10-2020-0014174.
20220127.
대한민국
멀티 패시베이션을 이용한 인쇄 전자소자 제조 방법 및 인쇄 전자소자.
10-2020-0011228.
20220110.
대한민국
n-형 박막 트랜지스터를 인쇄하기 위한 n-형 도핑 잉크, n-형 도핑 잉크를 이용하여 n-형 박막 트랜지스터를 인쇄하는 방법.
10-2018-0165193.
20210414.
대한민국
NFC 태그에 구비된 인쇄 슈퍼 캐패시터 제조 방법 및 인쇄 슈퍼 캐패시터를 포함하는 NFC 태그 제조 방법.
10-2018-0165172.
20210120.
대한민국
롤투롤 그라비아 인쇄를 이용한 온도 센서 태그 제조 방법.
10-2019-0010823.
20210113.
대한민국
위변조 방지를 위한 NFC QR 코드 라벨 및 NFC QR 코드 라벨의 제조 방법.
10-2018-0165590.
20200727.
대한민국
유연 열저항기 제조 방법, 유연 열저항기를 포함하는 온도 감지 장치 제조 방법, 및 유연 열저항기를 포함하는 온도 감지 장치.
10-2017-0167041.
20191223.
대한민국
Method for manufacturing angle and curvature detection sensor, and sensor (각도의 제조과정과 굴곡 형태 검출 센서 및 센서).
15526334.
20191119.
미국
발전기금
